 |
|||
|
Benefits
Applications
|
Requirements for Curbs
Curbs must meet several basic requirements if they are to serve their intended purposes and have long service life. Curbs must have the required mass, stability and strength to withstand the impacts of traffic and the effects of their environments and to maintain their positions even when crossed by traffic or struck by snowplows. They must have the strength to bridge small areas where subgrade support is inadequate. Designing curb sections to have adequate stability is discussed below in Section 5.0.
The standard sections shown in Figure II have been proven to have the necessary mass for strength and stability. Separate curb and gutter sections should be at least two feet wide with greater widths having more stability for a relatively small amount of construction costs.
In severe environments, curbs must have adequate durability to resist freeze-thaw cycles while being buried in snow and ice plowed to the sides of streets and being saturated with brine from deicing salts that is carried to the sides. The requirements for durable concrete that will withstand these severe conditions are discussed in Section 9.0.
Another important requirement is visibility. Because of their light and reflective surfaces, concrete curbs can be easily seen, even at night when pavements are wet. The washings of rain and the removal of debris by street sweeping are sufficient to meet this requirement.
>> Next: Curb Design
|
ConcreteAnswers for Architects, Engineers and Developers:
|
|
|
About NRMCA
|
Privacy Statement
|
|||
